Configuring System Name - 3Com OfficeConnect 3CDSG10PWR User Manual

92 C 5: M
HAPTER ANAGING
Configuring System
Name
S I
YSTEM NFORMATION
The System Name Page allows the Network Administrator to provide a
user-defined system name, location, and contact information for the
device.
Monitor users have read-only permissions on this page.
To configure the System Name:
1 Click Administration > System Name > System Name. The System
Name Page opens:
Figure 40 System Name Page
The System Name Page includes the following fields:
System Name — Defines the user-defined device name. The field
■
length is 0-100 characters.
System Location — Defines the location where the system is
■
currently running. The field length is 0-100 characters.
System Contact — Defines the name of the contact person. The field
■
length is 0-100 characters.
2 Define the fields.
3 Click . The System Name is enabled, and the device is updated.