Clearing Location Policy Rules And Disabling The Location Policy - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

326 C 13: C
HAPTER ONFIGURING
WX1200 display location policy
Id Clauses
----------------------------------------------------------------
1) deny if user eq *.theirfirm.com
2) permit vlan guest_1 if vlan neq *.ourfirm.com
3) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.ourfirm.com
4) permit inacl svcs_2.in outacl svcs_3.out if vlan eq bldg4.*
To move the first rule to the end of the list and display the results, type the
following commands:
WX1200 clear location policy 1
success: clause 1 is removed.
WX1200 set location policy deny if user eq
*.theirfirm.com
WX1200 display location policy
Id Clauses
----------------------------------------------------------------
1) permit vlan guest_1 if vlan neq *.ourfirm.com
2) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.ourfirm.com
3) permit inacl svcs_2.in outacl svcs_3.out if vlan eq bldg4.*
4) deny if user eq *.theirfirm.com
Clearing Location
Policy Rules and
Disabling the
Location Policy
AAA N U
FOR ETWORK SERS
Displaying and Positioning Location Policy Rules
The order of location policy rules is significant. MSS checks a location
policy rule that is higher in the list before those lower in the list. Rules are
listed in the order in which you create them, unless you move them.
To position location policy rules within the location policy, use before
rule-number and modify rule-number in the set location policy
command, or use the clear location policy rule-number command.
For example, suppose you have configured the following location policy
rules:
To delete a location policy rule, use the following command:
clear location policy rule-number
Type display location policy to display the numbers of configured
location policy rules. To disable the location policy on a WX switch, delete
all the location policy rules.