Connecting Ac Power To A Qfx3500, Qfx3600, Or Qfx3600-I Device - Juniper QFX5110 Series Hardware Documentation

Connecting AC Power to a QFX3500, QFX3600, or QFX3600-I Device

The QFX3500, QFX3600, and QFX3600-I devices are shipped from the factory with two 650 W power
supplies pre-installed. Each power supply is a hot-removable and hot-insertable field-replaceable unit
(FRU) when the second power supply is installed and running. You can install replacement power supplies
without powering off the device or disrupting the switching function.
Ensure that you have a power cord appropriate for your geographical location available to connect AC
power to the device.
Before you begin connecting AC power to the device:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD) damage
(see "Prevention of Electrostatic Discharge Damage" on page
Ensure that you have connected the device chassis to earth ground.
CAUTION:
attach a cable lug to the grounding and power cables that you supply. A cable with
an incorrectly attached lug can damage the device (for example, by causing a short
circuit).
To meet safety and electromagnetic interference (EMI) requirements and to ensure
proper operation, you must connect the chassis to earth ground before you connect
it to power. For installations that require a separate grounding conductor to the
chassis, use the protective earthing terminal on the device chassis to connect to the
earth ground. For instructions on connecting earth ground, see
Ground to a QFX3500 Device" on page 334
or QFX3600-I Devices" on page
you plug the power supply in the device into a grounded AC power outlet by using
the AC power cord appropriate for your geographical location (see
Specifications for a QFX Series Device" on page
Install the power supply in the chassis. For instructions on installing a power supply in a QFX3500 device,
see "Installing a Power Supply in a QFX3500 Device" on page
supply in a QFX3600 or QFX3600-I device, see
Device" on page 447.
NOTE: Each power supply must be connected to a dedicated power source outlet.
To connect AC power to a QFX3500, QFX3600, or QFX3600-I device:
Before you connect power to the device, a licensed electrician must
308. The device gains additional grounding when
"Installing a Power Supply in a QFX3600 or QFX3600-I
242).
"Connecting Earth
or "Connecting Earth Ground to QFX3600
154).
453. For instructions on installing a power
"AC Power Cord
336