Capacity Utilization Panel; Alarms Panel - Juniper QFX5110 Series Hardware Documentation

Table 106: Health Status (continued)
Field
Fan Status

Capacity Utilization Panel

Table 107: Capacity Utilization
Field
Number of active ports
Total number of ports
Used-up MAC-Table entries
Supported MAC-Table entries
Number of VLANs configured
Number of VLANs supported

Alarms Panel

Displays information about the last five alarms raised in the system. For example, if there are 5 major
alarms, then details of all 5 major alarms are displayed. If there are 4 major alarms and 3 minor alarms,
Description
Indicates the status of the fans in the fan tray. The possible values are OK, Failed, and Absent.
Description
Indicates the number of active ports in the switch.
Configured Virtual Chassis ports (VCPs) are considered as
active ports.
Indicates the number of ports in the switch.
NOTE: In EX3300 and EX4600 Virtual Chassis, the total
number of ports of all of the switches is displayed.
NOTE: For EX4650 switches, on loading the switch, the
consolidated values for all the FPCs are displayed by
default.
Indicates the number of MAC table entries.
Indicates the maximum number of MAC table entries
permitted.
NOTE: For EX4650 switches, the supported maximum
number of MAC table entries are 288000.
Indicates the number of VLANs configured.
NOTE: Only tagged VLANs are counted.
Indicates the maximum number of VLANs supported.
NOTE: For EX4650 switches, the supported maximum
number of VLANs are 4094.
547