Packing A Qfx3500 Device For Shipping; Packing Qfx3500 Device Components For Shipping - Juniper QFX5110 Series Hardware Documentation

Packing a QFX3500 Device for Shipping

To pack a QFX3500 device for shipping:
1. Power down the device and remove the power cables. See
page 414.
2. Remove the cables that connect the QFX3500 device to all external devices.
3. Remove all field-replaceable units (FRUs) from the device.
4. Have one person support the weight of the device while another person unscrews and removes the
mounting screws.
5. Remove the device from the rack or cabinet (see
on page 220) and place the device in an antistatic bag.
6. Place the device in the shipping carton.
7. Place the packing foam on top of and around the device.
8. If you are returning accessories or FRUs with the device, pack them as instructed in
Device Components for Shipping" on page
9. Replace the accessory box on top of the packing foam.
10. Close the top of the cardboard shipping box and seal it with packing tape.
11. Write the RMA number on the exterior of the box to ensure proper tracking.

Packing QFX3500 Device Components for Shipping

CAUTION:
boxes if they do not fit together on one level in the shipping box.
To pack and ship QFX3500 device components:
612.
Do not stack device components. Return individual components in separate
"Powering Off a QFX3500 Device" on
"Chassis Lifting Guidelines for a QFX3500 Device"
"Packing QFX3500
612