Mounting A Qfx3500 Device In A Rack Or Cabinet - Juniper QFX5110 Series Hardware Documentation

6. Verify the chassis components received:
Management board
Two fan trays
One or two power supplies, depending on your order. If only one power supply is installed, a blank
panel should be installed on the second power supply slot.
7. Save the shipping carton and packing materials in case you need to move or ship the device later.
Table 71: Inventory of Components Supplied with a QFX3500 Device
Component
Chassis with management board, two fan trays, and one or two power supplies
Rear installation blades
RJ-45 cable and RJ-45 to DB-9 adapter
SFP/SFP+ port dust covers
QSFP+ port dust covers
Electrostatic discharge (ESD) grounding strap
RELATED DOCUMENTATION

Mounting a QFX3500 Device in a Rack or Cabinet | 328

Installing and Connecting a QFX3500 Device | 326
Mounting a QFX3500 Device in a Rack or Cabinet
IN THIS SECTION
Before You Begin Rack Installation | 329
Two Mounting Rails Procedure | 330
Four Mounting Rails Procedure | 332
328
Quantity
1
2
1
48
4
1