Connecting Ac Power To An Nfx350 Device - Juniper NFX350 Hardware Manual

Figure 19: Connecting a Grounding Cable to an NFX350 Device
3. Secure the grounding lug to the protective earthing terminal with the washers and screws.
4. Dress the grounding cable and ensure that it does not touch or block access to other device components.
WARNING:

Connecting AC Power to an NFX350 Device

The power supply in an NFX350 device is located on the rear panel.
Ensure that you have the following parts and tools available:
A power cord appropriate for your geographical location
A power cord retainer clip
CAUTION:
in the device into a grounded AC power outlet by using the AC power cord appropriate
for your geographical location (see
Device" on page
Figure 20 on page 74 and
Ensure that the cable does not drape where people could trip over it.
NFX350 device gets additional grounding when you plug the power supply
38).
Figure 21 on page 74 show the AC power supply unit for the NFX350 device.
"AC Power Cord Specifications for an NFX350
73