Listing The Chassis And Component Details Using The Cli - Juniper QFX5110 Series Hardware Documentation

Virtual chassis fabric

Hide thumbs Also See for QFX5110 Series:

Table of Contents

If you are returning a switch or component to Juniper Networks for repair or replacement, you must locate

the serial number of the switch or component. You must provide the serial number to the Juniper Networks

Technical Assistance Center (JTAC) when you contact them to obtain a Return Materials Authorization

"Contact Customer Support to Obtain Return Material Authorization" on page

If the switch is operational and you can access the command-line interface (CLI), you can list serial numbers

for the switch and for some components with a CLI command. If you do not have access to the CLI or if

the serial number for the component does not appear in the command output, you can locate the serial

number ID label on the switch or component.

If you want to find the serial number ID label on a component, you need to remove the

component from the switch chassis, for which you must have the required parts and tools

Listing the Chassis and Component Details Using the CLI

To list the QFX5110 switch and components and their serial numbers, use the show chassis hardware CLI

operational mode command.

user@device> show chassis hardware

Hardware inventory:

Routing Engine 0

Power Supply 0

Power Supply 1

Back Airflow - AFO

Serial number

WS3115130011

WS3115290015

MOC13346240015

QFX5110-48S-4Q

RE-QFX5110-48S-4Q

48x10G-4x100G

SFP+-10G-USR

QSFP28-100G-CU3M

QSFP+-40G-CU3M

JPSU-650W-AC-AFO

fan-ctrl-2 0, Front to

fan-ctrl-2 1, Front to

Show Quick Links

Table of Contents