Installing An Ex4300 Switch; Installing And Connecting An Ex4300 Switch - Juniper QFX5110 Series Hardware Documentation

CHAPTER 26

Installing an EX4300 Switch

IN THIS CHAPTER

Installing and Connecting an EX4300 Switch | 353

Unpacking an EX4300 Switch | 354
Mounting an EX4300 Switch | 355
Mounting an EX4300 Switch on Two Posts of a Rack or Cabinet | 356
Mounting an EX4300 Switch on Four Posts of a Rack or Cabinet | 359
Mounting an EX4300 Switch in a Recessed Position in a Rack or Cabinet | 363
Mounting an EX4300 Switch on a Wall | 363
Installing and Connecting an EX4300 Switch
To install and connect an EX4300 switch:
1. Follow instructions in
2. Install a power supply if it is not preinstalled:
Installing an AC Power Supply in an EX4300 Switch on page 465
Installing a DC Power Supply in an EX4300 Switch on page 467
3. Install a fan module if it is not preinstalled; see
page 469.
4. Mount the switch by following instructions appropriate for your site:
"Mounting an EX4300 Switch on Two Posts of a Rack or Cabinet" on page 356
brackets provided)
"Mounting an EX4300 Switch in a Recessed Position in a Rack or Cabinet" on page 363
2-in.-recess front brackets from the separately orderable four-post rack-mount kit)
"Unpacking an EX4300 Switch" on page
"Installing a Fan Module in an EX4300 Switch" on
354.
(by using the mounting
(by using the
353