Installation Instructions Warning; Qfx5100 Installation Safety Guidelines - Juniper QFX5110 Series Hardware Documentation

Installation Instructions Warning

WARNING:
power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de
voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter les
directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an die
Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema a la red de
alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.

QFX5100 Installation Safety Guidelines

The weight of a 1 U fully loaded QFX5100 switch chassis is approximately 30.8 lb (14 kg); the 2 U product
SKU is approximately 32 lbs (14.5 kg). Observe the following guidelines for lifting and moving a QFX5100
switch:
CAUTION:
floor, either remove the power supplies, fan modules, and any expansion modules
before attempting to install the switch, or ask someone to assist you during the
installation.
Read the installation instructions before you connect the device to a
If you are installing the QFX5100 switch above 60 in. (152.4 cm) from the
218