Preprovisioning A Virtual Chassis Fabric - Juniper QFX5110 Series Hardware Documentation

[edit virtual-chassis]
user@device# set member 0 fabric-tree-root
user@device# set member 1 fabric-tree-root
user@device# set member 4 fabric-tree-root
user@device# set member 5 fabric-tree-root
NOTE: This option can also be configured anytime later during VCF operation if you observe
internal VCF multicast traffic flow issues with default MDTs.
RELATED DOCUMENTATION
Understanding Virtual Chassis Fabric Configuration | 4
Adding a Device to a Virtual Chassis Fabric | 394
Removing a Device From a Virtual Chassis Fabric | 405
Understanding Virtual Chassis Fabric Components

Preprovisioning a Virtual Chassis Fabric | 373

Understanding Traffic Flow Through a Virtual Chassis Fabric
Preprovisioning a Virtual Chassis Fabric
Preprovisioning a Virtual Chassis Fabric (VCF) configuration allows you to assign the member ID and role
for each device in the VCF. See Understanding Virtual Chassis Fabric Components and
Chassis Fabric Configuration" on page 4
into a non-mixed or mixed VCF.
Before you begin:
Update all devices to the same version of Junos OS that supports VCF. See Installing Software Packages
on QFX Series Devices or Installing Software on an EX Series Switch with a Virtual Chassis or Single Routing
Engine (CLI Procedure).
for details on the supported devices that can be interconnected
"Understanding Virtual
373