Installing A Qfx5110 Switch; Standalone Installation Overview - Juniper QFX5110 Series Hardware Documentation

CHAPTER 22

Installing a QFX5110 Switch

IN THIS CHAPTER

Standalone Installation Overview | 262

Unpacking a QFX5110 | 263
Mounting a QFX5110 in a Rack | 264
Connect the QFX5110 to Earth Ground | 267
Connecting AC Power to a QFX5110 | 268
Connecting DC Power to a QFX5110 | 271
Standalone Installation Overview
You can mount a QFX5110:
Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets provided with the
switch for this configuration.
Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket provided in
the standard mounting kit for this configuration.
To install and connect a QFX5110:
1. Follow the instructions in Unpacking a QFX5110.
2. Determine how the switch is to be mounted.
Flush or recessed-mounted in a rack, seeMounting a QFX5110 in a Rack .
3. Follow the instructions in:
a. Connect the QFX5110 to Earth Ground
b. Connecting the QFX5110 to Power
262