Site Preparation Checklist For A Qfx3500 Device - Juniper QFX5110 Series Hardware Documentation

Table 14: Site Preparation Checklist (continued)
Item or Task
Acquire cables and connectors:
Determine the number of cables
needed based on your planned
configuration.
Review the maximum distance allowed
for each cable. Choose the length of
cable based on the distance between
the hardware components being
connected.
Plan the cable routing and management.
RELATED DOCUMENTATION
General Safety Guidelines and Warnings | 203
General Site Guidelines
Installing and Connecting a QFX3600 or QFX3600-I Device | 298

Site Preparation Checklist for a QFX3500 Device

The checklist in Table 13 on page 92
QFX3500 device installation.
Table 15: Site Preparation Checklist
Item or Task
Environment
Verify that environmental factors such as
temperature and humidity do not exceed
device tolerances.
Power
Measure distance between external power
sources and device installation site.
For More Information
"Determining Interface Support for
the QFX3600 Device" on page 140
Determining Transceiver Support for
QFabric Systems
summarizes the tasks you need to perform when preparing a site for
For More Information
"Environmental Requirements and
Specifications for a QFX3500
Device" on page 102
Performed By Date
Performed By Date
95