Dc Power Supply In Ex4300 Switches; In This Section - Juniper QFX5110 Series Hardware Documentation

Table 63: AC Power Cord Specifications for 1100 W AC Power Supplies for EX4300 Switches and 1400 W
AC Power Supplies for EX4300-48MP and EX4300-48MP-S Switches (continued)
Country/Region Electrical Specifications
North America 125 VAC, 15 A, 60 Hz
Switzerland 250 VAC, 10 A, 50 Hz
United Kingdom 250 VAC, 10 A, 50 Hz
CAUTION:
switch only. Do not use the cord with any other product.
CAUTION:
RELATED DOCUMENTATION
Connecting AC Power to an EX4300 Switch

DC Power Supply in EX4300 Switches

IN THIS SECTION

Characteristics of a DC Power Supply | 185
DC Power Supply Airflow | 186
N+0 Redundancy Configuration of DC Power Supplies | 187
N+N Redundancy Configuration of DC Power Supplies | 188
The DC power supply in EX4300 switches is a hot-insertable and hot-removable field-replaceable unit
(FRU): You can install it without powering off the switch or disrupting the switching function.
Plug Standards
NEMA 5-15 Type N5/15
SEV 1011 / 6534-2 Type 12G
BS 1363/A Type BS89/13
The AC power cord for the EX4300 switch is intended for use with this
Power cords must not block access to switch components.
Juniper Model Number
CBL-PWR-C15M-HITEMP-US
CBL-PWR-C15M-HITEMP-SZ
CBL-PWR-C15M-HITEMP-UK
184