General Safety Information; General Safety Guidelines And Warnings - Juniper QFX5110 Series Hardware Documentation

CHAPTER 17

General Safety Information

IN THIS CHAPTER

General Safety Guidelines and Warnings | 203

Definitions of Safety Warning Levels | 204
Fire Safety Requirements | 207
Qualified Personnel Warning | 208
Warning Statement for Norway and Sweden | 209
General Safety Guidelines and Warnings
The following guidelines help ensure your safety and protect the device from damage. The list of guidelines
might not address all potentially hazardous situations in your working environment, so be alert and exercise
good judgment at all times.
Perform only the procedures explicitly described in the hardware documentation for this device. Make
sure that only authorized service personnel perform other system services.
Keep the area around the device clear and free from dust before, during, and after installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could become caught
in the device.
Wear safety glasses if you are working under any conditions that could be hazardous to your eyes.
Do not perform any actions that create a potential hazard to people or make the equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed for wet
environments.
Operate the device only when it is properly grounded.
Follow the instructions in this guide to properly ground the device to earth.
203