Dc Power Supply Leds In Ex4300 Switches - Juniper QFX5110 Series Hardware Documentation

NOTE: If the IN OK LED and the OUT OK LED are not lit green, either the AC power cord is
not installed properly or the power input voltage is not within normal operating range.
If the IN OK LED is lit green and the OUT OK LED is unlit or lit red, the AC power supply is
installed properly, but the power supply has an internal failure.

DC Power Supply LEDs in EX4300 Switches

Figure 217 on page 576
Figure 217: DC Power Supply Faceplate on an EX4300 Switch
1 IN OK LED
—
Table 130 on page 576 describes the LEDs on the DC power supplies.
Table 130: DC Power Supply LEDs on an EX4300 Switch
Name Color
IN OK Unlit
Green
shows the location of the LEDs on a DC power supply for an EX4300 switch.
Description
Indicates one of the following:
Power supply is disconnected from DC power feed.
DC power input voltage is not within normal operating range.
No DC power input.
The power supply is receiving power.
2 OUT OK LED
—
576