Replacing Qfx3600 Components; Installing And Removing Qfx3600 Or Qfx3600-I Device Hardware Components - Juniper QFX5110 Series Hardware Documentation

CHAPTER 32

Replacing QFX3600 Components

IN THIS CHAPTER

Installing and Removing QFX3600 or QFX3600-I Device Hardware Components | 444

Removing a Power Supply from a QFX3600 or QFX3600-I Device | 445
Installing a Power Supply in a QFX3600 or QFX3600-I Device | 447
Removing a Fan Tray from a QFX3600 or QFX3600-I Device | 449
Installing a Fan Tray in a QFX3600 or QFX3600-I Device | 450
Installing and Removing QFX3600 or QFX3600-I Device Hardware
Components
The QFX3600 or QFX3600-I device chassis is a rigid sheet-metal structure that houses the hardware
components. The field-replaceable units (FRUs) in QFX3600 and QFX3600-I devices are:
Power supplies
Fan trays
SFP transceivers on management ports labeled C0S and C1S
QSFP+ transceivers on access and uplink ports labeled Q0 through Q15
All of the QFX3600 and QFX3600-I device FRUs are hot-insertable and hot-removable: you can remove
and replace them without powering off the device or disrupting device functions.
CAUTION:
within 1 minute of removal to prevent chassis overheating. Replace a failed fan tray
with a new fan tray within 1 minute of removal to prevent chassis overheating.
To install a power supply in a QFX3600 or QFX3600-I device, follow the instructions in
Supply in a QFX3600 or QFX3600-I Device" on page
QFX3600-I device, follow the instructions in
Device" on page 445.
Replace a failed power supply with a blank panel or new power supply
447. To remove a power supply from a QFX3600 or
"Removing a Power Supply from a QFX3600 or QFX3600-I
444
"Installing a Power