Qfx5110 Management Port Leds - Juniper QFX5110 Series Hardware Documentation

Table 72: Chassis Status LEDs on a QFX5110 Switch (continued)
Name
MST–Primary in a QFX
Virtual Chassis or Routing
Engine Primary in a VCF
ID–Identification
RELATED DOCUMENTATION
show chassis alarms
request chassis beacon

QFX5110 Management Port LEDs

The management ports (labeled C0 for 10/100/1000BASE-T and C1 for 10/100/1000BASE-T and SFP
1000BASE-X connections) on a QFX5110 switch have two LEDs that indicate link status and link activity
(see Figure 182 on page
Color
Unlit
Green
Green
Unlit
Blue
497). The left LED indicates status; the right LED indicates link/activity.
State Description
Off The switch is a line card member in a
QFX Virtual Chassis.
On steadily The switch is one of the following:
A standalone switch
In the primary role in a QFX Virtual
Chassis
Is the routing engine primary in a
VCF
Blinking The switch is the backup primary in a
QFX Virtual Chassis or the backup
routing engine in a VCF.
Off The beacon feature is not enabled on
the switch. This feature is enabled
using the request chassis beacon
command.
Blinking The beacon feature is enabled on the
switch. This feature is enabled using
the request chassis beacon command.
496