Cable Specifications For Console And Management Connections For The Qfx Series - Juniper QFX5110 Series Hardware Documentation

Table 36: QSFP+ MPO Fiber-Optic Crossover Cable Pinouts (continued)
Pin
9
10
11
12
Cable Specifications for Console and Management Connections for the
QFX Series
Table 37 on page 146 lists the specifications for the cables that connect the QFX Series switch to a
management device.
NOTE: The QFX Series can be configured with SFP management ports that support 1000BASE-SX
transceivers. See the
for use with these transceivers.
Table 37: Cable Specifications for Console and Management Connections for the QFX Series
Port on QFX
Series Device Cable Specification
Console port RS-232 (EIA-232) serial
cable
Management port Category 5 cable or
equivalent suitable for
1000BASE-T operation
Hardware Compatibility Tool
Cable Supplied
One 7-foot (2.13-meter) long
RJ-45 patch cable and RJ-45
to DB-9 adapter
One 7-foot (2.13-meter) long
RJ-45 patch cable
Pin
4
3
2
1
for more on the fiber-optic cables required
Maximum
Length
7 feet
(2.13 meters)
328 feet
(100 meters)
146
Device
Receptacle
RJ-45
RJ-45