Unpack A Qfx5100 Device - Juniper QFX5110 Series Hardware Documentation

b. "Connecting AC Power to a QFX5100 Device" on page 285
Device on page 288
c. Register Products—Mandatory for Validating SLAs
4. Depending on how you plan to use the QFX5100 device, do one of the following:
If you are using the QFX5100 device as a standalone switch, follow the instructions in Configure a
QFX5100 Device.
If you are using the QFX5100 device as a Node device in a QFX3000-G QFabric system, see
QFX3000-G QFabric System Installation Overview for information about the steps to install and configure
your QFX3000-G QFabric system.
If you are using the QFX5100 device as a Node device in a QFX3000-M QFabric system, see
QFX3000-M QFabric System Installation Overview for information about the steps to install and
configure your QFX3000-M QFabric system.
If you are using a QFX5100-24Q as an Interconnect device in a QFX3000-M QFabric system, see
Connecting a QFX5100 Node Device to a QFX5100-24Q Interconnect Device.
If you are using the QFX5100 device in a Virtual Chassis Fabric, see
in a Virtual Chassis Fabric" on page
RELATED DOCUMENTATION
Rack Requirements for a QFX5100 Device | 111
Cabinet Requirements for a QFX5100 Device | 117
Clearance Requirements for Airflow and Hardware Maintenance for a QFX5100 Device | 122

Unpack a QFX5100 Device

The QFX5100 switch chassis is a rigid sheet-metal structure that houses the hardware components. A
QFX5100 device is shipped in a cardboard carton, secured with foam packing material. The carton also
contains an accessory box and quick start instructions.
CAUTION:
not unpack the switch until you are ready to begin installation.
To unpack a QFX5100 device:
295.
QFX5100 devices are maximally protected inside the shipping carton. Do
or Connecting DC Power to a QFX5100
"Connecting a QFX5100 Device
277