Unit Functions And; Unit Functions And Operation; Unit Functions - Panasonic FP7 User Manual

1.1 Unit Functions and Operation

1.1 Unit Functions and Operation

1.1.1 Unit Functions

■
Inputs and outputs allocated flexibly
● As sixteen inputs and sixteen outputs can be allocated to various functions according to
purposes to be used, effective system configuration can be achieved.
● Voltage detection circuits are built in the inputs and they recognize input voltage
automatically. Any of the voltages of 24 VDC, 12 VDC and 5 VDC can be used.
● For outputs, the MOSFET of both Pch and Nch is adopted, and they can be used in any of
the modes, sink output, source output, push-pull output (negative logic) and push-pull output
(positive logic). When setting the push-pull output, a high-speed response can be obtained.
Input/Output Allocated function
Interrupt input: Max. 8 points
High-speed counter: Max. 4 channels (Count input: 2 points, Reset input: 1 point, Mask input:
Input
1 point)
Input for positioning: Max. 4 channels
Comparison match output: Max. 8 points
Output Pulse output or PWM output: Max. 4 ch
Positioning pulse output: Max. 4 ch
(Note 1) The positioning function is available only for the FP7 Multi I/O Unit (H type).
■
Equipped with various functions
One unit is equipped with the following functions.
1-2
(Note 1)
WUME-FP7MXY-06