Terminal Layout Diagram Of The Gm1 Pulse Output Unit - Panasonic GM1 Series Reference Manual

3.2 Expansion Units
No. Name
(4) B
(5) CL
(6) D
(7) Z
(8) PA
(9) PB
(10) ERR
(Note 1) The pulse output signal display LEDs (A and B) blink at the output frequency (speed). For this reason
they may appear to light steadily at high-speed output.
(Note 2) The near home (D) and home input (Z) LEDs light when the respective input becomes valid.
(Note 3) Pulse input signal (PA) and (PB) display the pulse signal input status.

3.2.6 Terminal Layout Diagram of the GM1 Pulse Output Unit

3-18
LED color Function
● When set to pulse / sign output method
Flashing: During pulse output
Unlit: During stop
● When set to CW / CCW output method
Flashing: During pulse output (Forward)
Unlit: During stop (Forward)
Indicates the pulse output B signal.
● When set to pulse / sign output method
Lit: Reverse direction command
Green
Unlit: Forward direction command
● When set to CW / CCW output method
Flashing: During pulse output (Reverse)
Unlit: During stop (Reverse)
Indicates the counter clear signal output.
Green Lit: Output ON
Unlit: Output OFF
Indicates the near home status.
Green
Lit: ON
Unlit: OFF
Indicates the home input state.
Green
Lit: ON
Unlit: OFF
Green
Indicates the pulse input A signal.
Green
Indicates the pulse input B signal.
Indicates that an error has occurred in the unit.
Red Lit: Error occurred.
Unlit: Normal
(Note 1)
(Note 2)
(Note 2)
(Note 3)
(Note 3)
WUME-GM1H-02