Parts and Specifications
2.3
Analog Output Unit (FP2 - DA4)
2.3
Analog Output Unit (FP2 - DA4)
1
Analog output terminals
1
For analog output unit, there are analog outpput terminals for channels 0 to 3.
Terminals with a dot mark are not used; however, they are connected to the analog
input circuit internally so do not connect anything to them.
The terminal block can be removed to facilitate wiring.
For detailed information
Range setting switch
2
Used to set the analog output range.
For detailed information
2 - 6
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
2
section 3.1.2
section 4.1.2
FP2 Analog Unit