Emptying The Hole-Punch Waste Container - Xerox AltaLink B80XX Series User Manual

Emptying the Hole-Punch Waste Container

If the printer has the optional Office Finisher or High Volume Finisher installed, the control panel displays
a message when the hole-punch waste container is full.
WARNING:
Do not perform this procedure when the printer is copying or printing.
Emptying the Hole-Punch Waste Container in the Office Finisher
1. Open the finisher door.
2. Slide the hole-punch waste container out of the finisher.
3. Dispose of the waste.
4. Slide the emptied hole-punch waste container back into the finisher.
5. Close the finisher door.
Xerox AltaLink B80XX Series Multifunction Printer
® ®
Maintenance
217
User Guide