Abnormal and Electrical Noise
Abnormal Noise when Power is Turned On
Phaser 6180 Color Laser Printer Service Manual
Troubleshooting Reference Table
Applicable Parts
Transfer Unit, PL4.1.1
■
Print Cartridge (C/M/Y/K),
■
PL5.1.18-21
Fuser Unit, PL6.1.10
■
Main Drive, PL8.1.2
■
Drive Assembly, PL8.1.7
■
Optional 550-Sheet Feeder, PL12.1.1
■
Warning
Ensure to wait for the Fuser to cool down before starting the procedure.
Troubleshooting Procedure Table
Step
Actions and Questions
Perform the Main Motor test (page 4-40):
1
Service Mode
>
Engine Diag
>
Main
Motor. Does the noise come from
the printer?
2
1. Check the Fuser for correct installation.
2. Reseat the Fuser.
3. Perform the Main Motor test (page 4-40):
Service Mode
Test
>
Main
Motor.
4. Does the noise come from the printer?
1. Check the Black Print Cartridge for
3
correct installation.
2. Reseat the Black Print Cartridge.
3. Perform the Main Motor test (page 4-40):
Service Mode
Test
>
Main
Motor.
4. Does the noise come from the printer?
1. Check the Transfer Unit for correct
4
installation.
2. Reseat the Transfer Unit.
3. Perform the Main Motor test (page 4-40):
Service Mode
Test
>
Main
Motor.
4. Does the noise come from the printer?
Wiring and Plug/Jack Map References
>
Motor Test
>
Engine Diag
>
Motor
>
Engine Diag
>
Motor
>
Engine Diag
>
Motor
General Troubleshooting
Yes
No
Go to step 2.
Go to step 6.
Go to step 3.
Complete.
Go to step 4.
Complete.
Go to step 5.
Complete.
4-73