Configuring Authentication Server Settings For Kerberos - Xerox WorkCentre 6655 System Administrator Manual

Security

Configuring Authentication Server Settings for Kerberos

1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select Kerberos (Solaris) or Kerberos (Windows).
Click Add New.
3.
4. Under Server Information, in the Domain or Realm field, type the domain or realm for your
authentication server.
5. Select the desired address type.
6. Type the appropriately formatted address and port numbers for both the primary and backup
addresses.
Note: A backup address is optional.
7. If you want to use an LDAP server for network authorization or personalization:
Click Add LDAP Mapping.
a.
b. Select the LDAP server from the list and click Add Mapping, or click Add New to add an LDAP
server.
8. Click Save.
To specify server settings for an alternate authentication server, click Add New.
9.
10. To copy the settings from another server, select a server from the list and click Copy From.
11. Click Edit to update the settings.
Configuring Authentication Server Settings for NDS
1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select NDS (Novell).
Note: If you do not see this authentication type, ensure that the NetWare protocol has been
enabled under Connectivity>Setup>NetWare>Edit.
3. Click Add New.
4. Under Default Tree/Context, in the Tree and Context fields, type the details.
5. Click Save Server.
To specify server settings for an alternate authentication server, click Add New.
6.
7. To copy the settings from another server, select a server from the list and click Copy From.
Click Edit to update the settings.
8.
74 Xerox WorkCentre
®
System Administrator Guide
6655 Color Multifunction Printer
®