F-Runtime Group Information Db - Siemens SINUMERIK MC Commissioning Manual

3.8.3

F-runtime group information DB

Introduction
The F-runtime group information DB provides key information on the corresponding F-runtime
group and on the safety program as a whole.
The F-runtime group information DB is generated automatically when an F-runtime group is
created. In so doing, a symbol is assigned for the F-runtime group information DB, e.g.
"RTG1SysInfo". You have the option of changing the name in the Safety Administration Editor.
Information in the F-runtime group information DB
The F-runtime group information DB provides the following information:
Name
MODE
F_SYSINFO
MODE
TCYC_CURR
TCYC_LONG
TRTG_CURR
TRTG_LONG
T1RTG_CURR
T1RTG_LONG
F_PROG_SIG
F_PROG_DAT
F_RTG_SIG
F_RTG_DAT
VERS_S7SAF
You access the content of the F-runtime group information DB with fully qualified addressing.
Either collectively with the F_SYSINFO PLC data type (UDT), for example,
"RTG1SysInfo.F_SYSINFO", provided by the F-system or individual information, for example,
"RTG1SysInfo.F_SYSINFO.MODE".
Safety Integrated (with SINAMICS S120)
Commissioning Manual, 02/2020, A5E46305916B AB
Data type For processing
in the safety
program
BOOL x
BOOL —
DINT —
DINT —
DINT —
DINT —
DINT —
DINT —
DWORD —
DTL —
DWORD —
DTL —
DWORD —
For processing in Description
the standard user
program
x 1 = Disabled safety mode
x 1 = Disabled safety mode
x Current cycle time of the F-runtime group,
in ms
x Longest cycle time of the F-runtime
group, in ms
x Current runtime of the F-runtime group, in
ms
x Longest runtime of the F-runtime group,
in ms
x Not supported by STEP 7 Safety V16.
x Not supported by STEP 7 Safety V16.
x Collective F-signature of the safety pro‐
gram
x Compilation date of the safety program
x F-runtime groups signature
x Compilation date of the F-runtime group
x Version identifier of STEP 7 Safety
Safety program of the F-PLC
3.8 F-runtime groups
79