Calling "global checksums"
MENU SELECT > Diagnostics > Menu forward key > Safety > SI checksum > Global
checksums
Figure 7-11
Higher-level actual checksums that are calculated from the master checksums (Page 326) are
displayed in the "SI checksums global checksums" diagnostic screen. If you call the diagnostics
screen, then the calculation of the global checksums is started - and after completion, these
actual checksums, along with the calculation date, are displayed.
If, based on these global checksums, you identify some changes in the safety configuration,
then you can switch from screen "Global checksums" to the individual axis/drive checksums in
order to identify specific differences.
Safety Integrated (with SINAMICS S120)
Commissioning Manual, 02/2020, A5E46305916B AB
7.4 Diagnostic functions in the SINUMERIK ONE Commissioning Tool
"SI checksums global checksums" diagnostic screen
Diagnostics
321