Siemens SINUMERIK MC Commissioning Manual page 389

Abbreviation Source of abbreviation
p... ‑
PCU PC Unit
PELV Protective Extra Low Voltage
PG Programmiergerät
PLC Programmable Logic Control
PN PROFINET (Process Field network)
PPU Panel Processing Unit
PZD Prozessdaten
r... ‑
RAM Random Access Memory
SAM Safe Acceleration Monitor
SBC Safe Brake Control
SBT Safe Brake Test
SCA Safe Cam
SCC Safety Control Channel
SDI Safe Direction
SH Sicherer Halt
SI Safety Integrated
SIC Safety Info Channel
SIL Safety Integrity Level
SLA Safely Limited Acceleration
SLM Smart Line Module
SLP Safe Limited Position
SLS Safely Limited Speed
SM Sensor Module
SMC Sensor Module Cabinet
SME Sensor Module External
SMI Sensor Module Integrated
SOS Safe Operating Stop
SP Safe Position
SS1 Safe Stop 1
SS1E Safe Stop 1 with external Stop
SS2 Safe Stop 2
SS2E Safe Stop 2 with external Stop
SS2ESR Safe Stop 2 with extended Stop and Retract
SSM Safe Speed Monitor
STO Safe Torque Off
STOP A, B, ... Stop reaction
Safety Integrated (with SINAMICS S120)
Commissioning Manual, 02/2020, A5E46305916B AB
Meaning
Setting parameters
Computer unit
Safe extra low voltage
Programming device
Programmable logic controller
Open Ethernet standard for automation
Compact control unit
Process data
Display parameters (read only)
Memory for reading and writing
Safe acceleration monitoring
Safe brake activation
Safe Brake Test (pure diagnostics function)
Safe Cam
Safety Control Channel
Safe motion direction
Safe standstill
Safety Integrated
Safety Info Channel
Safety Integrity Level
Safely-Limited Acceleration
Smart Line Module
Safely-Limited Position
Safely-limited speed
Sensor Module
Sensor Module Cabinet
Sensor Module External
Sensor Module Integrated
Safe operating stop
Safe Position
Safe Stop 1 (time-monitored, ramp-monitored)
Safe Stop 1 with external stop
Safe Stop 2
Safe Stop 2 with external stop
Safe Stop 2 with extended stop and retraction
Safe feedback from speed monitor
Safe Torque Off
Stop response In the event of a fault, the system re‐
sponds corresponding to the configured stop re‐
sponse.
Applies to SINAMICS Integrated or SINAMICS S120
drives. Does not apply to S210 drives.
Appendix
A.2 Abbreviations
389