Siemens SINUMERIK MC Commissioning Manual page 397

Procedure
To create a PLC commissioning archive, proceed as follows:
1. In the project tree, right-click the device name, e.g. "MC_1" and select "Create SINUMERIK
archive > Hardware and all program blocks" in the shortcut menu.
The "Create SINUMERIK archive" dialog opens.
Figure A-1
2. Make the required settings:
3. Click "Create archive" to confirm the entry.
Result
The SINUMERIK archive is created and stored in the path that you have specified.
Safety Integrated (with SINAMICS S120)
Commissioning Manual, 02/2020, A5E46305916B AB
MC-PLC archive
Element Purpose
File name Enter the desired file name of the SINUMERIK archive in the text field.
File extensions cannot be changed
The file extension (.dsf) is not displayed and cannot be changed.
Archive path Click Browse and select a directory, or enter the directory directly.
Default storage location for data export
The used path is shown as the default setting the next time you export an archive.
To specify the default setting for the data export in the settings, switch to "General >
General > Data exchange > Storage location for data export" in the settings.
Created by Name of the author or a person responsible for the project.
The default setting corresponds to the setting of the user name in the TIA Portal
under: "Extras > Settings > General > General settings > User name".
Comment Input of a comment for the SINUMERIK archive.
As default setting, the comment field includes information on which project compo‐
nents are contained in the archive and whether the archive can be used in a virtual
environment.
A.5 Creating a PLC commissioning archive of a SINUMERIK MC
Appendix
397