Telegrams Profisafe - Siemens SINUMERIK MC Commissioning Manual

Diagnostics
7.4 Diagnostic functions in the SINUMERIK ONE Commissioning Tool
7.4.4 SI telegrams PROFIsafe
The meanings and statuses of the individual bits in the control word and status word are shown
in the "PROFIsafe SI telegrams" diagnostic screen. You can switch between the following
views:
● Status word
● Status word cam (note: only when the cam function is enabled in SINAMICS)
Call
MENU SELECT > Diagnostics > Menu forward key > Safety > SI telegrams > PROFIsafe
Figure 7-8
The view of all user data of the control word and status word is displayed using the "Details"
softkey.
Additional information
You can obtain general information about PROFIsafe telegrams in Chapter Control via
PROFIsafe (Page 208).
318
"PROFIsafe SI telegrams" diagnostic screen
Safety Integrated (with SINAMICS S120)
Commissioning Manual, 02/2020, A5E46305916B AB