Specifications; Led Indicators - Delta AS Series Manual

AS Ser ies M od ul e Man ua l
10.2.8.3
Installed on PLC
Communication Protocol
EtherNet/IP Interface
Fieldbus
Network Cable Length
Error Indicator
Max. IO Slot Supported
Devices to Read and Write
Minimum Time for Data Exchange to Operate
Maximum Data Length/Per Transmission
PROFINET Configuration
10.2.8.4
Number
1 SF indicator
2 BF indicator
3 LINK indicator X1/X2
4 ACT indicator X1/X2
RJ-45 Pin Definition
1 TX+
5 N/C
10
1 0 - 2 4

Specifications

Item

LED Indicators

Name
System Fault Indicator
RED light ON: an error occurs in PROFINET configuration or incorrect
OFF: no system error
Bus Fault Indicator
RED light ON: the network connection is OFF.
RED light BLINKING: the network connection is working fine but the
OFF: the communication with PN Controller is working fine.
Indicates the status of Ethernet connection
Green light ON: a network connection is established
OFF: a network connection is not established
Indicates the status of Ethernet communication
Orange BLINKING: data transmission
OFF: no data transmission
2 TX-
6 RX-
Specification
AS300
PROFINET RT
100 Mbit with 2 x RJ45
PROFINET Devices
100 meter
System Fail (SF): Red; Bus Fail (BF): Red
17
AS300 series data registers
10 ms
Input: 250 words
Output: 250 words
Download PROFINET Configurations from PN Controller
Description
data for exchange
communication with PN Controller is NOT normal.
3 RX+
7 N/C
AS00SCM
9
RTU modules
4 N/C
8 N/C