Delta AS Series Manual page 461

Ch ap te r 11 De viceNe t M as ter Sca nner Mo du le AS01DN ET-A
PLC Program

S1：The number of the module sending DeviceNet communication. The first one of the right side is 01.

S2：DeviceNet node ID (MAC ID); Node ID of VFD-C2000: 00.

S3：Service code; 0X10: read one single attribute content.

S4：Class ID; Class ID of CMC-DN01: 05.

S5：Instance ID; Instance ID of CMC-DN01: 01.

S6：Attribute ID; Attribute ID of CMC-DN01: 09.

S7：Write data size with the unit: Byte. The written-data size is 2 in this example.

S8：The start device where the written data are stored.

S9：Communication timeout time.

S10： Times of re-transmission. Times of re-sending communication when communication timeout occurs.

D1：Completion flag.

D2：Error flag.

D3：Error code.

D4：Read data size. When DNETRW instruction is used to write data, the value in D4 can be set to any

data.
D5：The start device where read data are stored. When DNETRW instruction is used to write data, the

value in D5 can be set to any data.
11
11 - 3 5