Delta AS Series Manual page 487

Item
Watch and set in real time the configured exchange data in current system; change output data,
Start
watch input data and use control word to control the operation state of AS01DNET (RTU) in real
Monitor
time.
Name Name of each module
Firmware version of each module. Choosing corresponding version of firmware, download the
Firmware
module parameter information which matches the firmware version.
Description The description of basic information of each module.
The mapping range of input data of each module, determined by start address offset of mapping
Input
input data and the size.
The mapping range of output data of each module, determined by start address offset of mapping
Output
output data and the size.
Comment Add a comment for each I/O modules
The current configuration data will not be saved until you click the OK button to finish the
OK
configuration.
Clicking the Cancel button to exit AS01DNET (RTU) configuration page, current configuration data
Cancel
will not be saved.
3.
Clicking the Scan button on the page, the main AS01DNET (RTU) configuration page changes as below.
Ch ap te r 11 De viceNe t M as ter Sca nner Mo du le AS01DN ET-A
Description
11
11 - 6 1