Specifications - Delta AS Series Manual

10.2.7.3

Specifications

System Specifications

General
Web
MODBUS TCP Specifications (only available for CPU modules)

General
MODBUS TCP
Server
MODBUS TCP
Client
Note: The connection numbers of Server and Client are counted separately.
EtherNet/IP Specifications

General
CIP Network I/O
Connection
CIP Network
Explicit Message
Item
Device type
Topology
IP Settings
Availability
Max. connection number
Functions
Item
Device type
Max. connection number
Max. data length/per
transmission
Max. connection number
Max. data length/per
transmission
Item
Device type
CIP connection number
TCP connection number
Requested Packet Interval
(RPI)
Max. Transmission Speed
Max. data length/per
transmission
Class 3
(Connected Type)
UCMM
Ch ap te r 10 F unc tio n Car ds
Specification
Master, Slave and RTU
Star and linear topologies are supported.
 When installed on AS300 PLC CPU, you can
only use HWCONFIG from ISPSoft for editing.
 When installed on AS00SCM-A and used for
RTU application, you can edit via software
or hardware.
 Software: Set the ID2 and FORMAT2 to
0x000 and use HWCONFIG from EIP Builder
for editing.
 Hardware: Use the ID2 and FORMAT2 to set
IP address to 192.168.1.X (X=1~254) or turn
ID2 and FORMAT2 to 0xFF to make it in
DHCP mode.
AS300 Series PLC
AS00SCM-A (available only for RTU mode)
8
View device information
Account management
AS-FEN02 firmware update
When installed in AS00SCM-A and in RTU mode,
the module monitoring is supported.
Specification
Server, Client
8
200 words
8
200 words
Specification
Adapter
8
8 (Servers)
1 ms~1000ms
10,000 pps
200 bytes
Total 8 (Servers)
(for both class 3 and UCMM connection types)
10
1 0 - 7