Delta AS Series Manual page 52

A S S er i es Mo d u le Ma n ua l
CR#
_3
22 Channel Alarm Setup
23
The
24 range for channel 1
25
The minimum scale
26
range for channel 2
27
The minimum scale
28
range for channel 3
29
The minimum scale
30
range for channel 4
31
The
32
range for channel 1
33
The
34
range for channel 2
35
The
36 range for channel 3
3 - 8
Name
6: 40 ms
7: 50 ms
8: 60 ms
9: 70 ms
10: 80 ms
11: 90 ms
12: 100 ms
0: open channel alarm
1: close channel alarm
bit0: channel 1
bit1: channel 2
bit2: channel 3
bit3: channel 4
0: warning
1: alarm
bit8: error in the power supply
bit9: error in the module hardware
bit10: error in calibration
minimum scale
When the format is set to integer in HWCONFIG,
the scale range is invalid.
For analog-digital modules, it is much more
convenient if the system can convert digital values
to floating-point values for earier understanding.
Here you can set the minimum and maximum scale
ranges of corresponding floating-point values for
channels.
maximum scale
For example, if the scale range for an analog to
digital input channel is ± 10.0 V, it indicates the
maximum value is +10.0 V and the minimum value
maximum scale
is -10.0 V.
If the scale range for an analog to digital input
maximum scale
channel is 4 mA ~ 20 mA. It indicates the maximum
Description
Atr. Defaults
R/W 0
-10.0
-10.0
-10.0
-10.0
R
10.0
10.0
10.0