Diadesigner+ (Hardware Configuration); Initial Setting - Delta AS Series Manual

4.4 DIADesigner+ (Hardware Configuration)

The following example uses AS04DA-A.

4.4.1 Initial Setting

(1)
Start DIADesigner+, click New Project, and then Project+Device to create a new project.
(2)
Add modules in:
➀ Double-click Hardware Configuration
➁ Select the + section and drag and drop the module that you want to add from the Product List to the +
section.
or ➂ Right-click Delta_Localbus Master to see the context meun and then double-click Add Device to
add devices manually or double-click Scan for Devices.
Ch a pt er 4 A na l o g O u tp ut M o du l e A S 0 4D A
4_
4 - 2 3