Delta AS Series Manual page 268

Hide thumbs Also See for AS Series:

Table of Contents

AS Ser ies M od ul e Man ua l

4. Filtering out weights

There are two ways to filter out weights.

Filtering out the maximum/minimum weight measured: If there is a maximum weight or a minimum

weight, you can filter out the maximum weight or the minimum weight. The larger the value, the more

weights are filtered out. Range: K0–K8

Averaging weights: The values recorded are averaged so that a steady value is obtained. There may be

peak values due to unavoidable external factors, and the average value obtained may change

accordingly. A maximum of 100 values can be averaged.

5. Making multi-point adjustments

Make adjustments to get the weight measured by a cell to correspond to the digital value displayed by the

load cell module. Generally, two points are adjusted. After a system is set up, put no load on the scale. The

weight measured is 0 grams when there is no load. Then place an object of a given weight on the scale, and

set a digital value corresponding to the weight. At that point, two points have been adjusted. For example, if

you have a load cell sensor which can measure a maximum weight of 10 kg, and if 1 kg corresponds to

K1000, the curve is like the one shown below.

Average weight

Adjusting two points

Digital value

Show Quick Links

Chapters

Table of Contents