Delta AS Series Manual page 506

AS Ser ies M od ul e Man ua l
11.5.4.3.4.
Status Word and Control Word of AS01DNET (RTU)
The start input address and start output address in the mapping areas of AS01DNET (RTU) are used as the status word
and control word of AS01DNET (RTU) respectively with the detailed explanation in the following table.
11
Control word of AS01DNET(RTU)

Bit
bit0
~
bit2
bit3
bit4
bit5
bit6
bit7
bit8
bit9
bit10
bit11
bit12
bit13
bit14
bit15
Status word of AS01DNET(RTU)

Bit
bit0
bit1
bit2
bit3
bit4
bit5
bit6
bit7
bit8
bit9
bit10
bit11
bit12
11 - 8 0
Status value
000 Make no control setting for the operation of AS01DNET(RTU)
001
010
Other
0
1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
Status value
0 AS01DNET (RTU) in RUN state
1 AS01DNET (RTU) stops.
0/1 Reserved
0 No error occurs in I/O modules.
1 An error occurs in I/O modules.
0/1 Reserved
0 Current connection matches the configuration.
1 Current connection is inconsistent with the configuration.
0 AS01DNET (RTU) works normally.
1 The voltage of the power supply for AS01DNET (RTU) is too low.
0/1 Reserved
0 AS01DNET (RTU) works normally.
1 The number of points/ modules exceeds allowed range.
0/1 Reserved
0/1 Reserved
0/1 Reserved
0/1 Reserved
0/1 Reserved
Description
Set AS01DNET(RTU) to RUN mode
Set AS01DNET(RTU) to STOP mode
Reserved
Reserved
Restart AS01DNET (RTU)
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Description