Delta AS Series Manual page 265

Input
Description
value
Subtract the weight on CH1. Use the
subtracted weight as the tare weight
100
and store it in CR604 and CR605
(DWORD).
Restore the tare weight stored in CR604
101
and CR605 to CH1.
Clear the weight measured by CH1 to
102 zero. You might need to execute this
command after each power-off.
Subtract the weight on CH2. Use the
subtracted weight as the tare weight
103
and store it in CR606 and CR607
(DWORD).
Restore the tare weight stored in CR606
104
and CR607 to CH2.
Clear the weight measured by CH2 to
105 zero. You might need to execute this
command after each power-off.
Start a theoretical calibration for CH1 -
16#030F
CH2.
Restore default settings and settings in
16#0502
Flash stay intact.
16#6001 Write the current settings into Flash
Ch ap te r 8 Lo ad Ce ll Mo du le AS02 LC
Input value
16#020F Start a new recording for CH1 - CH2.
16#0211 Stop recording for CH1.
16#0212 Stop recording for CH2.
16#021F Stop recording for CH1 - CH2.
16#0301 Start a theoretical calibration for CH1.
16#0302 Start a theoretical calibration for CH2.
Restore default settings and clear
16#0501
settings in Flash.
16#6000 Read the current settings from Flash
Description
8 - 11
8_