Delta AS Series Manual page 330

AS Ser ies M od ul e Man ua l
If the AS00SCM-A functions as a Modbus slave, you need to set a slave ID and baud rate.
1)
Drag to add AS00SCM-A in the system configuration area. Make sure the knob of AS00SCM-A is turned to COM
mode and no power connected to it.
2)
Click the I/O Scan button to make the system read the module's current configuration. The PLC assigns the input
and output device ranges.
_9
Function card
Function card 1
Function card 2
9 - 4 0
Device from which Register in the
data is read CPU module
16#0000 D26000
16#0200 D26200
Device into which Register in the
data is written CPU module
16#0100 D26100
16#0300 D26300