Delta AS Series Manual page 435

Ch ap te r 11 De viceNe t M as ter Sca nner Mo du le AS01DN ET-A
Product picture Model
Used for connection of the DeviceNet network and
electromechanical equipment such as AC motor
IFD9502
drive, PLC, temperature controller, servo drive, HMI,
user-defined device.
A fieldbus data analysis tool, with one end: CAN
interface and the other end: USB interface can be
IFD6503 used for getting the CAN data or sending the data to
the CAN node. It is used with the Netview Builder
software together.
Used for connecting AC motor drive to DeviceNet
E-series AC motor drive
network via CME-DN01 card.
Used for connecting C2000 series AC motor drive to
CMC-DN01
the DeviceNet network.
Used for the connection of DeviceNet network and
DN-02
AC motor drive.
Used for the connection of DeviceNet network and
DVPDT01-S
S series PLC.
Function
11 - 9
11