Delta AS Series Manual page 120

A S S er i es Mo d u le Ma n ua l
*1: If the input signal exceeds the hardware input limit, the module only shows the maximum value. If the
input signal is below the lower limit, it only shows the minimum value.
*2: If the input signal exceeds the hardware input limit, it also exceeds the conversion limit and a conversion
limit error appears. For example in the voltage input mode (-10 V to +10 V), when the input signal is 10.15 V,
exceeding the hardware upper limit, it also exceeds the conversion upper limit. The module uses the upper
limit value (32384) as the input signal and a conversion limit error appears.
*3: If an input signal exceeds the absolute range, it might damage the channel.
Analog-to-Digital
Conversion
Rated Input Range
Rated Conversion
Range
Hardware Input
_5
Limit*
1
Conversion Limit*
Error Rate
Hardware Resolution
Input Impedance
Absolute Input
Range* 3
*1: If the input signal exceeds the hardware input limit, the module only shows the maximum value. If the
input signal is below the lower limit, it only shows the minimum value.
*2: If the input signal exceeds the hardware input limit, it also exceeds the conversion limit and a conversion
limit error appears. For example in the voltage input mode (4 mA to 20 mA), when the input signal is 0 mA,
exceeding the hardware upper limit, it also exceeds the conversion upper limit. The module uses the upper
limit value (-384) as the input signal and a conversion limit error appears.
*3: If an input signal exceeds the absolute range, it might damage the channel.
5 - 4
±20 mA
K-32000
~
K+2000
-20.24 mA ~ 20.24 mA
K-32384
~
2
K32384
Room Temperature: ±0.2% ; Full Temperature Range: ±0.5%
Current Input
0 mA–20 mA
K0
~
K32000
-0.24 mA ~ 20.24 mA
K-384
~
K32384
16 bits
250Ω
±32 mA
4 mA–20 mA
K0
~
K32000
3.81 mA ~ 20.19 mA
K-384
~
K32384