Engine - Toro Groundsmaster 4500-D Series Service Manual

Engine

g307774
1. LH front engine mount bracket
2. RH front engine mount bracket
3. LH rear engine mount bracket
4. RH rear engine mount bracket
5. Lock washer (16 used)
6. Cap screw (16 used)
7. Engine mount (4 used)
8. Flange head screw (8 used)
Engine Removal (Figure
Yanmar Diesel Engine: Service and Repairs
9. Flange nut (13 used)
10. Rebound washer (4 used)
11. Lock washer
12. Cap screw (3 used)
13. Cap screw
14. Cap screw
15. Tailpipe support bracket
16. Clamp
19)
1. Park machine on a level surface, lower cutting decks, stop engine, engage
parking brake and remove key from the ignition switch.
2. Remove hood from the machine (see
3. Remove battery cover. Disconnect negative battery cable from the battery
first and then disconnect positive battery cable.
Figure 19
17.
18.
19.
20.
21.
22.
Hood (page
Page 4–20
Engine
Negative battery cable
Tailpipe
Flange nut (4 used)
Exhaust flange
Exhaust gasket
8–26)).
Groundsmaster ® 4500-D/4700-D
19245SL Rev A