Toro Groundsmaster 4500-D Series Service Manual page 400

Installation (continued)
Axles, Planetaries and Brakes: Service and Repairs
13. Coat a new O-ring with grease and install left side axle support half. Tighten
axle support case screws from 47 to 56 N·m (35 to 41 ft-lb).
14. Install input shaft/pinion gear assembly (see
7–33)).
15. Coat new O-rings with grease, align differential shaft splines with differential
gear assembly and slide differential shaft assemblies onto axle support.
16. Install bevel gear case/axle case assemblies (see
Axle Case (page 7–22)).
Page 7–42
Input Shaft/Pinion Gear (page
Bevel Gear Case and
Groundsmaster ® 4500-D/4700-D
19245SL Rev A