Toro Groundsmaster 4500-D Series Service Manual page 396

Removal (continued)
Axles, Planetaries and Brakes: Service and Repairs
g276530
1. Differential case
6. Drive the spring pin from the differential case with a punch and hammer.
Discard the spring pin
Note: Mark and arrange all components so they can be reassembled in
their original position.
g276532
1. Differential pinion shaft
2. Pinion gear
3. Pinion washer
4. Side gear
7. Remove the differential pinion shaft, pinion gears and pinion washers.
Remove the differential side gears and side gear shims. Remove the ring
gear only if it will be replaced
Note: Replacement ring gears are only available in matched ring and pinion
sets.
2
Figure 265
2. Spring pin
(Figure 265).
Figure 266
5. Side gear shims
6. Ring gear
7. Differential case
8. Bolt/washer (8 used)
(Figure 266).
Page 7–38
1
Groundsmaster ® 4500-D/4700-D
19245SL Rev A