Toro Groundsmaster 4500-D Series Service Manual page 425

Installation (Figure
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
292) (continued)
Make sure to not damage the electrical harness or other parts while
moving the console arm assembly.
3. Position and secure console arm assembly to seat. Install all fasteners
before fully tightening them.
A. Secure support bracket (item 24) and support channel (item 22) with
flange nut (item 29) and carriage screw (item 28).
B. Secure console arm support (item 23) to coupling nut with cap screw
(item 30).
C. Place flat washer (item 11), seat belt buckle (item 31) and spacer (item
26) between seat and console arm support (item 23). Secure with cap
screw (item 27).
D. Fully tighten all fasteners to secure console arm assembly to seat.
4. Connect seat electrical connector to machine wire harness.
IMPORTANT
Page 8–21 Chassis: Service and Repairs