Toro Groundsmaster 4500-D Series Service Manual page 266

Removal (Figure 148) (continued)
Hydraulic System: Service and Repairs
g309018
1. Manifold body
2. Orifice (0.055)
3. Orifice (0.030)
g309019
1. Manifold body
2. O-ring
3. Straight fitting (3 used)
5. Remove hydraulic manifold from the frame using
A flow control orifice is placed beneath several of the hydraulic
fittings on the lift circuit junction manifold
uses two (2) different orifice sizes. If a fitting is removed from the lift
junction manifold and an orifice is in the manifold port, make sure to
remove orifice and label its position for assembly purposes. Also
note location of groove in orifice for assembly purposes.
Figure 149
4. Straight fitting (3 used)
5. Zero leak plug
Figure 150
4. O-ring
5. 90º hydraulic fitting
IMPORTANT
Page 5–164
Figure 148 as guide.
(Figure 149). The manifold
Groundsmaster ® 4500-D/4700-D
19245SL Rev A