Toro Groundsmaster 4500-D Series Service Manual page 377

Install Rear Axle (Figure
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
238) (continued)
Failure to maintain proper wheel lug nut torque could result in failure
or loss of wheel and may result in personal injury.
8. Install wheel assemblies to rear axle. Lower machine to ground. Torque
wheel lug nuts from 116 to 135 N·m (85 to 100 ft−lb).
g310216
1. Axle check plug
g310217
1. Steering stop bolt
9. Fill rear axle (Figure
85W−140 weight gear lube. Lubricant capacity is approximately 2.37 liters
(80 fl. oz.) for the rear axle and 0.47 liters (16 fl. oz.) for the gearbox.
10. Check rear wheel toe−in and adjust if necessary (see Traction Unit Operator's
Manual).
11. Check steering stop bolt adjustment. When the steering cylinder is fully
contracted (left turn), a gap of 1.6 mm (1/16 in) should exist between bevel
gear case casting and stop bolt on left axle case.
bolt location.
WARNING
Figure 242
2. Axle fill plug
Figure 243
2. Bevel gear case (LH)
242) and rear axle gearbox
Page 7–19 Axles, Planetaries and Brakes: Service and Repairs
(Figure 240) with SAE
Figure 243 shows stop