Toro Groundsmaster 4500-D Series Service Manual page 221

Removal (Figure 112) (continued)
Groundsmaster ® 4500-D/4700-D
19245SL Rev A
4. To prevent contamination of hydraulic system during wheel motor removal,
thoroughly clean exterior of motor.
5. Disconnect hydraulic lines from wheel motor. Put caps or plugs on lines
and fittings to prevent contamination. Label the hydraulic lines to show their
correct position on the wheel motor for assembly purposes.
Support wheel motor to prevent motor from falling during removal.
6. Remove wheel motor using
g308860
1. O-ring
2. Straight fitting
3. O-ring
4. O-ring
5. Straight fitting
IMPORTANT
Figure 112 as a guide.
Figure 113
LEFT WHEEL
6. O-ring
7. O-ring
8. Tee fitting
9. O-ring
Page 5–119 Hydraulic System: Service and Repairs